PC parts and components for desktop computers, including CPUs, motherboards, RAM, SSDs, graphics cards, power supplies and cooling solutions.
PC Parts & Components
-
4GB DDR3 1333MHzCL9 2×2GB SO-DIMMCorsair
Corsair ValueSelect 4GB is the CMSO4GX3M2A1333C9 configuration: 2 x 2GB DDR3 SO-DIMM memory rated at 1333MHz with CL9 latency. It contains 2 matched modules of 2GB each, giving a confirmed total capacity of 4GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The 2 x 2GB kit provides the full 4GB as one defined configuration, with 2GB on each module. Its 1333MHz rating is the specified speed class for this SKU, paired with confirmed CL9 CAS latency. Operating voltage is specified as 1.5V.Compatibility requires a laptop or compact computer that supports DDR3 SO-DIMM memory, 2GB per module and the complete 2 x 2GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 4GB is the combined capacity of the complete product, while 2GB is the capacity of each module. The 2 x 2GB kit also requires enough compatible memory slots for all 2 modules. Brand Corsair Model CMSO4GX3M2A1333C9 Total Capacity 4GB Capacity per Module 2GB Kit Configuration 2 x 2GB Memory Type DDR3 Speed 1333MHz CAS Latency CL9 Form Factor SO-DIMM Voltage 1.5V
£49.99 £30.00
-
128GB DDR5 5600MHzCL46 2×64GB SO-DIMMCrucial
Crucial 128GB is the CT2K64G56C46S5 configuration: 2 x 64GB DDR5 SO-DIMM memory rated at 5600MHz with CL46 latency. It contains 2 matched modules of 64GB each, giving a confirmed total capacity of 128GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The 2 x 64GB kit provides the full 128GB as one defined configuration, with 64GB on each module. Its 5600MHz rating is the specified speed class for this SKU, paired with confirmed CL46 CAS latency. Operating voltage is specified as 1.1V.Compatibility requires a laptop or compact computer that supports DDR5 SO-DIMM memory, 64GB per module and the complete 2 x 64GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 128GB is the combined capacity of the complete product, while 64GB is the capacity of each module. The 2 x 64GB kit also requires enough compatible memory slots for all 2 modules. Brand Crucial Model CT2K64G56C46S5 Total Capacity 128GB Capacity per Module 64GB Kit Configuration 2 x 64GB Memory Type DDR5 Speed 5600MHz CAS Latency CL46 Form Factor SO-DIMM Voltage 1.1V
£1,990.00
-
8GB DDR3L 1600MHzCL11 1×8GB SO-DIMMTranscend
Transcend 8GB is the TS1GSK64W6H configuration: 1 x 8GB DDR3L SO-DIMM memory rated at 1600MHz with CL11 latency. It contains 1 module of 8GB each, giving a confirmed total capacity of 8GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 8GB module provides the complete 8GB capacity for a compatible replacement or controlled memory upgrade. Its 1600MHz rating is the specified speed class for this SKU, paired with confirmed CL11 CAS latency. Operating voltage is specified as 1.35V. Confirmed rank organisation is 2Rx8.Compatibility requires a laptop or compact computer that supports DDR3L SO-DIMM memory, 8GB per module and the complete 1 x 8GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 8GB is the combined capacity of the complete product, while 8GB is the capacity of each module. Brand Transcend Model TS1GSK64W6H Total Capacity 8GB Capacity per Module 8GB Kit Configuration 1 x 8GB Memory Type DDR3L Speed 1600MHz CAS Latency CL11 Form Factor SO-DIMM Rank 2Rx8 Voltage 1.35V
£98.00
-
16GB DDR4 2666MHzCL19 1×16GB SO-DIMMCrucial
Crucial 16GB is the CT16G4SFRA266 configuration: 1 x 16GB DDR4 SO-DIMM memory rated at 2666MHz with CL19 latency. It contains 1 module of 16GB each, giving a confirmed total capacity of 16GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 16GB module provides the complete 16GB capacity for a compatible replacement or controlled memory upgrade. Its 2666MHz rating is the specified speed class for this SKU, paired with confirmed CL19 CAS latency. Operating voltage is specified as 1.2V. The module is specified as unbuffered memory.Compatibility requires a laptop or compact computer that supports DDR4 SO-DIMM memory, 16GB per module and the complete 1 x 16GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 16GB is the combined capacity of the complete product, while 16GB is the capacity of each module. Brand Crucial Model CT16G4SFRA266 Total Capacity 16GB Capacity per Module 16GB Kit Configuration 1 x 16GB Memory Type DDR4 Speed 2666MHz CAS Latency CL19 Form Factor SO-DIMM ECC Non-ECC Buffered Type Unbuffered Voltage 1.2V
£164.00
-
64GB DDR4 2666MHzCL19 2×32GB SO-DIMMCrucial
Crucial 64GB is the CT2K32G4S266M configuration: 2 x 32GB DDR4 SO-DIMM memory rated at 2666MHz with CL19 latency. It contains 2 matched modules of 32GB each, giving a confirmed total capacity of 64GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The 2 x 32GB kit provides the full 64GB as one defined configuration, with 32GB on each module. Its 2666MHz rating is the specified speed class for this SKU, paired with confirmed CL19 CAS latency.Compatibility requires a laptop or compact computer that supports DDR4 SO-DIMM memory, 32GB per module and the complete 2 x 32GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 64GB is the combined capacity of the complete product, while 32GB is the capacity of each module. The 2 x 32GB kit also requires enough compatible memory slots for all 2 modules. This SKU is associated with Mac systems, so those platform requirements should be checked before installation. Brand Crucial Model CT2K32G4S266M Total Capacity 64GB Capacity per Module 32GB Kit Configuration 2 x 32GB Memory Type DDR4 Speed 2666MHz CAS Latency CL19 Form Factor SO-DIMM Voltage 1.2V
£488.00
-
64GB DDR4 2666MHzCL19 2×32GB SO-DIMMCrucial
Crucial 64GB is the CT2K32G4SFD8266 configuration: 2 x 32GB DDR4 SO-DIMM memory rated at 2666MHz with CL19 latency. It contains 2 matched modules of 32GB each, giving a confirmed total capacity of 64GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The 2 x 32GB kit provides the full 64GB as one defined configuration, with 32GB on each module. Its 2666MHz rating is the specified speed class for this SKU, paired with confirmed CL19 CAS latency. Operating voltage is specified as 1.2V.Compatibility requires a laptop or compact computer that supports DDR4 SO-DIMM memory, 32GB per module and the complete 2 x 32GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 64GB is the combined capacity of the complete product, while 32GB is the capacity of each module. The 2 x 32GB kit also requires enough compatible memory slots for all 2 modules. Brand Crucial Model CT2K32G4SFD8266 Total Capacity 64GB Capacity per Module 32GB Kit Configuration 2 x 32GB Memory Type DDR4 Speed 2666MHz CAS Latency CL19 Form Factor SO-DIMM Voltage 1.2V
£499.00
-
48GB DDR5 5600MHzCL46 1×48GB SO-DIMMCrucial
Crucial 48GB is the CT48G56C46S5 configuration: 1 x 48GB DDR5 SO-DIMM memory rated at 5600MHz with CL46 latency. It contains 1 module of 48GB each, giving a confirmed total capacity of 48GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 48GB module provides the complete 48GB capacity for a compatible replacement or controlled memory upgrade. Its 5600MHz rating is the specified speed class for this SKU, paired with confirmed CL46 CAS latency. Operating voltage is specified as 1.1V.Compatibility requires a laptop or compact computer that supports DDR5 SO-DIMM memory, 48GB per module and the complete 1 x 48GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 48GB is the combined capacity of the complete product, while 48GB is the capacity of each module. Brand Crucial Model CT48G56C46S5 Total Capacity 48GB Capacity per Module 48GB Kit Configuration 1 x 48GB Memory Type DDR5 Speed 5600MHz CAS Latency CL46 Form Factor SO-DIMM Voltage 1.1V UPC 649528929969
£799.00
-
16GB DDR4 2400MHzCL16 2×8GB SO-DIMMCorsair
Corsair Vengeance 16GB is the CMSX16GX4M2A2400C16 configuration: 2 x 8GB DDR4 SO-DIMM memory rated at 2400MHz with CL16 latency. It contains 2 matched modules of 8GB each, giving a confirmed total capacity of 16GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The 2 x 8GB kit provides the full 16GB as one defined configuration, with 8GB on each module. Its 2400MHz rating is the specified speed class for this SKU, paired with confirmed CL16 CAS latency. Operating voltage is specified as 1.2V.Compatibility requires a laptop or compact computer that supports DDR4 SO-DIMM memory, 8GB per module and the complete 2 x 8GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 16GB is the combined capacity of the complete product, while 8GB is the capacity of each module. The 2 x 8GB kit also requires enough compatible memory slots for all 2 modules. Brand Corsair Model CMSX16GX4M2A2400C16 Total Capacity 16GB Capacity per Module 8GB Kit Configuration 2 x 8GB Memory Type DDR4 Speed 2400MHz CAS Latency CL16 Form Factor SO-DIMM Voltage 1.2V Colour Black
£149.00
-
16GB DDR5 5600MHzCL46 1×16GB SO-DIMMCrucial
Crucial 16GB is the CT16G56C46S5 configuration: 1 x 16GB DDR5 SO-DIMM memory rated at 5600MHz with CL46 latency. It contains 1 module of 16GB each, giving a confirmed total capacity of 16GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 16GB module provides the complete 16GB capacity for a compatible replacement or controlled memory upgrade. Its 5600MHz rating is the specified speed class for this SKU, paired with confirmed CL46 CAS latency. Operating voltage is specified as 1.1V.Compatibility requires a laptop or compact computer that supports DDR5 SO-DIMM memory, 16GB per module and the complete 1 x 16GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 16GB is the combined capacity of the complete product, while 16GB is the capacity of each module. Brand Crucial Model CT16G56C46S5 Total Capacity 16GB Capacity per Module 16GB Kit Configuration 1 x 16GB Memory Type DDR5 Speed 5600MHz CAS Latency CL46 Form Factor SO-DIMM Voltage 1.1V
£299.36
-
16GB DDR4 2666MHzCL19 1×16GB SO-DIMMCrucial
Crucial 16GB is the CT16G4S266M configuration: 1 x 16GB DDR4 SO-DIMM memory rated at 2666MHz with CL19 latency. It contains 1 module of 16GB each, giving a confirmed total capacity of 16GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 16GB module provides the complete 16GB capacity for a compatible replacement or controlled memory upgrade. Its 2666MHz rating is the specified speed class for this SKU, paired with confirmed CL19 CAS latency. Operating voltage is specified as 1.2V.Compatibility requires a laptop or compact computer that supports DDR4 SO-DIMM memory, 16GB per module and the complete 1 x 16GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 16GB is the combined capacity of the complete product, while 16GB is the capacity of each module. This SKU is associated with Mac systems, so those platform requirements should be checked before installation. Brand Crucial Model CT16G4S266M Total Capacity 16GB Capacity per Module 16GB Kit Configuration 1 x 16GB Memory Type DDR4 Speed 2666MHz CAS Latency CL19 Form Factor SO-DIMM Voltage 1.2V
£139.00
-
2TB 3.5" SATA5400RPM 256MB CMRSeagate
The Seagate SkyHawk 2TB is a 3.5-inch internal hard drive created for surveillance DVR and NVR storage. This exact product is model ST2000VX017 and connects through SATA 6Gb/s for use in compatible security recording systems.Seagate specifies 5400 RPM, a 256MB cache and CMR recording for ST2000VX017. The maximum sustained transfer rate is up to 180MB/s. SATA 6Gb/s is the interface bandwidth of the connection and should not be interpreted as the continuous read or write speed of the mechanical disk.SkyHawk is tuned for 24/7 video workloads and supports recording from up to 64 HD camera streams. Its workload rating is up to 180TB per year, while surveillance-focused firmware is intended to maintain consistent recording behaviour in supported DVR and NVR equipment.Installation requires a compatible SATA controller, a standard drive power connection and a free 3.5-inch internal bay. The 2TB capacity, RPM, cache, CMR recording technology and transfer rate stated here apply specifically to ST2000VX017 and are not inferred from another SkyHawk capacity. Before use, check the recorder manufacturer's compatibility guidance if it provides a list of approved hard drive models. Brand Seagate Model SkyHawk / ST2000VX017 MPN ST2000VX017 Capacity 2TB Drive Type Internal HDD Form Factor 3.5-inch Interface SATA 6Gb/s Rotational Speed 5400 RPM Cache 256MB Recording Technology CMR Intended Use Surveillance Maximum Sustained Transfer Rate Up to 180MB/s Workload Rating 180TB/year
£363.99 £140.00
-
4TB 3.5" SATA5400RPM 256MB CMRSeagate
The Seagate SkyHawk 4TB is a 3.5-inch internal hard drive for surveillance DVR and NVR systems. This exact ASIN is identified by model ST4000VX016 and uses a SATA 6Gb/s interface for installation in compatible video recording equipment.Seagate specifies 5400 RPM, a 256MB cache and CMR recording for this 4TB SkyHawk model. The maximum sustained transfer rate is listed at up to 180MB/s. SATA 6Gb/s describes the interface bandwidth and does not mean the mechanical disk transfers data continuously at 6Gb/s.SkyHawk is designed for always-on video workloads, with ImagePerfect firmware intended to support consistent surveillance recording. The model supports up to 64 HD camera streams and carries a workload rating of up to 180TB per year, making its intended use distinct from ordinary desktop storage.Installation requires a free 3.5-inch bay, a compatible SATA controller and standard SATA power. The stated capacity, RPM, cache, CMR recording technology and transfer rate apply specifically to ST4000VX016 and are not copied from another capacity in the SkyHawk range. For DVR or NVR deployments, check the recorder manufacturer's compatibility guidance for the exact drive model before installation. Brand Seagate Model SkyHawk / ST4000VX016 MPN ST4000VX016 Capacity 4TB Drive Type Internal HDD Form Factor 3.5-inch Interface SATA 6Gb/s Rotational Speed 5400 RPM Cache 256MB Recording Technology CMR Intended Use Surveillance Maximum Sustained Transfer Rate Up to 180MB/s Workload Rating 180TB/year
£167.00
-
6TB 3.5" SATA7200RPM 256MB CMRWestern Digital
The WD Red Pro 6TB is a 3.5-inch internal hard drive designed for NAS and RAID storage. This exact product uses MPN WD6005FFBX and connects through SATA 6Gb/s, making it suitable for compatible multi-bay network storage systems that require a conventional internal SATA HDD.Western Digital specifies 7200 RPM, a 256MB cache and CMR recording for WD6005FFBX. The published maximum sustained transfer rate is up to 238MB/s. SATA 6Gb/s describes the interface bandwidth and must not be read as the sustained speed of the mechanical drive.WD Red Pro is built for continuous NAS workloads and this model is rated for up to 550TB per year. NASware firmware is intended to support compatibility and controlled error recovery in RAID environments, while the Red Pro family is positioned for demanding multi-user storage rather than ordinary desktop-only use.Installation requires a free 3.5-inch bay, SATA data connection and suitable power connection. Capacity, RPM, cache, recording technology and transfer rate in this listing refer specifically to WD6005FFBX and are not copied from another WD Red Pro capacity. Check the NAS or RAID enclosure compatibility list before installation, particularly where the system vendor validates individual drive models. Brand Western Digital Model WD Red Pro / WD6005FFBX MPN WD6005FFBX Capacity 6TB Drive Type Internal HDD Form Factor 3.5-inch Interface SATA 6Gb/s Rotational Speed 7200 RPM Cache 256MB Recording Technology CMR Intended Use NAS Maximum Sustained Transfer Rate Up to 238MB/s Workload Rating Up to 550TB/year
£330.00
-
8TB 3.5" SATA7200RPM 256MB CMRSeagate
The Seagate IronWolf 8TB is a 3.5-inch internal hard drive intended for RAID and network attached storage. This exact Amazon product is identified by MPN ST8000NT002 and uses a SATA 6Gb/s connection for compatible multi-bay NAS systems.The listing specifies 7200 RPM, a 256MB cache and CMR recording for ST8000NT002. SATA 6Gb/s describes the host interface bandwidth and should not be interpreted as the sustained read or write speed of the mechanical disk. No separate sustained transfer figure is stated here without reliable model-specific confirmation.IronWolf is purpose-built for NAS environments with multiple users and is positioned for systems with up to eight drive bays. IronWolf Health Management is supported on compatible NAS platforms, and the product includes Seagate Rescue Data Recovery Services together with a three-year limited warranty according to the listing.A compatible SATA host, standard drive power connection and a free 3.5-inch bay are required. The 8TB capacity, 7200 RPM speed, 256MB cache and CMR recording technology in this listing are tied specifically to ST8000NT002 and are not taken from the older ST8000VN002 model. Check the NAS manufacturer's compatibility list before installation where the enclosure vendor qualifies exact drive models. Brand Seagate Model IronWolf / ST8000NT002 MPN ST8000NT002 Capacity 8TB Drive Type Internal HDD Form Factor 3.5-inch Interface SATA 6Gb/s Rotational Speed 7200 RPM Cache 256MB Recording Technology CMR Intended Use NAS
£369.00
-
4TB 3.5" SATA5400RPM 256MB CMRSeagate
The Seagate SkyHawk 4TB is a 3.5-inch internal surveillance hard drive for DVR and NVR systems. This Amazon package uses MPN ST4000VXZ16; the underlying drive model is ST4000VX016 and the host connection is SATA 6Gb/s.For ST4000VX016, Seagate specifies 5400 RPM, a 256MB cache and CMR recording, with a maximum sustained transfer rate of up to 180MB/s. The SATA 6Gb/s figure refers to interface bandwidth and is not the sustained read or write speed of the mechanical drive.SkyHawk is designed for continuous surveillance recording and supports up to 64 HD camera streams. ImagePerfect firmware is intended to support consistent video workloads, while the stated workload rating is up to 180TB per year. These features reflect its DVR/NVR role rather than general desktop or NAS positioning.Installation requires a compatible SATA controller, standard drive power and a free 3.5-inch internal bay. The capacity, RPM, cache, CMR technology and transfer rate here are tied to ST4000VX016/ST4000VXZ16 and are not copied from another SkyHawk capacity. For a recorder with an approved-drive list, verify the exact model before adding the disk to an existing surveillance system. Brand Seagate Model SkyHawk / ST4000VX016 MPN ST4000VXZ16 Capacity 4TB Drive Type Internal HDD Form Factor 3.5-inch Interface SATA 6Gb/s Rotational Speed 5400 RPM Cache 256MB Recording Technology CMR Intended Use Surveillance Maximum Sustained Transfer Rate Up to 180MB/s Workload Rating 180TB/year
£172.00
-
8TB 3.5" SATA7200RPM 256MB CMRWestern Digital
The WD Red Pro 8TB is a 3.5-inch internal hard drive designed for NAS and RAID environments. This exact model is WD8003FFBX and uses a SATA 6Gb/s interface for compatible network storage systems with an internal 3.5-inch drive bay.Western Digital specifies 7200 RPM, a 256MB cache and CMR recording for WD8003FFBX. The published maximum sustained transfer rate is up to 235MB/s. SATA 6Gb/s is the interface bandwidth and should not be confused with the sustained transfer speed of the hard drive itself.This generation of WD Red Pro is intended for demanding multi-bay NAS operation and is rated for workloads of up to 300TB per year. NASware firmware supports RAID-oriented operation and compatibility, while the drive's CMR recording avoids the shingled recording method used by some consumer HDDs.A compatible SATA host, power connection and free 3.5-inch bay are required. The 8TB capacity, 7200 RPM speed, 256MB cache, CMR technology and transfer figure in this listing are tied specifically to WD8003FFBX, not to another Red Pro revision. Check the NAS manufacturer's qualified-drive or compatibility list where available before adding the drive to an existing RAID set. Brand Western Digital Model WD Red Pro / WD8003FFBX MPN WD8003FFBX Capacity 8TB Drive Type Internal HDD Form Factor 3.5-inch Interface SATA 6Gb/s Rotational Speed 7200 RPM Cache 256MB Recording Technology CMR Intended Use NAS Maximum Sustained Transfer Rate Up to 235MB/s Workload Rating Up to 300TB/year
£379.00
-
4TB 3.5" SATA5400RPM 256MB CMRSeagate
The Seagate IronWolf 4TB is a 3.5-inch internal hard drive designed for NAS and RAID storage. This exact model is ST4000VN006 and connects through SATA 6Gb/s, with specifications intended for compatible multi-user network attached storage systems.Seagate specifies 5400 RPM, a 256MB cache and CMR recording for ST4000VN006. The product manual lists a maximum sustained data rate of up to 202MB/s. SATA 6Gb/s is the interface bandwidth and does not represent the sustained read or write performance of the mechanical disk.IronWolf uses AgileArray features for NAS operation and includes rotational vibration sensing for supported multi-bay environments. The drive is designed for up to eight-bay NAS systems and is rated for a workload of up to 180TB per year, with IronWolf Health Management available on compatible NAS platforms.A free 3.5-inch bay, SATA data connection and suitable power connection are required. The 4TB capacity, 5400 RPM speed, 256MB cache, CMR technology and transfer rate in this listing refer specifically to ST4000VN006 rather than another IronWolf capacity or revision. Check the NAS manufacturer's compatibility list before installation where exact drive qualification is required. Brand Seagate Model IronWolf / ST4000VN006 MPN ST4000VN006 Capacity 4TB Drive Type Internal HDD Form Factor 3.5-inch Interface SATA 6Gb/s Rotational Speed 5400 RPM Cache 256MB Recording Technology CMR Intended Use NAS Maximum Sustained Transfer Rate Up to 202MB/s Workload Rating 180TB/year
£434.99 £174.00
-
LGA 1851 H810 mATXDDR5 1× M.2 Wi-Fi 5ASRock
The ASRock H810M-X WiFi is a compact Micro-ATX computer motherboard built around the Intel H810 chipset and LGA1851 socket for Intel Core Ultra processors (Series 2). It combines a practical layout with dual-channel DDR5 support, making it suitable for efficient office, home and general-purpose PC builds where modern connectivity and a smaller board footprint are important.Two DDR5 DIMM slots support up to 128GB of system memory and speeds up to 6400 MT/s. Expansion is handled by one PCIe 4.0 x16 slot plus one PCIe 4.0 x1 slot. Storage options include one Hyper M.2 socket running at PCIe Gen4x4 and four SATA III connectors, giving this micro ATX motherboard a useful mix of fast NVMe storage and conventional SATA expansion.For networking, the board provides Realtek 2.5 Gigabit Ethernet together with dual-band 802.11ac Wi-Fi and Bluetooth 5.0. Display connectivity includes HDMI 2.1, DisplayPort 1.4 and D-Sub for processors with integrated graphics. USB connectivity includes rear and front USB 3.2 Gen1 ports, a front USB Type-C header and USB 2.0. Realtek ALC897 7.1-channel HD audio, RGB and addressable RGB headers, AMI UEFI BIOS and a 24-pin ATX plus 8-pin CPU power design complete this well-equipped PC motherboard. Brand ASRock Model H810M-X WiFi MPN 90-MXBS6-A0UAYZ Socket LGA 1851 Chipset Intel H810 Supported Processors Intel Core Ultra Series 2 Form Factor Micro-ATX Memory Technology DDR5 Memory Slots 2 × DIMM Maximum Memory 128GB Memory Speed Up to 6400 MT/s PCIe x16 Slots 1 × PCIe x16 (PCIe 4.0 x16) Additional PCIe Slots 1 × PCIe 4.0 x1 M.2 Slots 1 × Hyper M.2 (PCIe Gen4x4) SATA Ports 4 × SATA III Wireless Connectivity Wi-Fi 5, Bluetooth 5.0 LAN 2.5 Gigabit Ethernet Video Outputs HDMI, DisplayPort, D-Sub USB USB Type-A, USB Type-C Audio 7.1 Channel HD Audio (Realtek ALC897) BIOS 256Mb AMI UEFI Internal Headers RGB, 2 × Addressable RGB, TPM, USB 2.0, USB 3.2 Gen1, front USB-C Power Connectors 24-pin ATX, 8-pin 12V Rear I/O PS/2, D-Sub, HDMI, DisplayPort, 2 × USB 3.2 Gen1, 4 × USB 2.0, RJ-45, audio jacks, antenna ports Operating System Windows 11 64-bit
£110.00 £102.77
-
LGA 1851 B860 mATXDDR5 2× M.2 No Wi-FiASRock
The ASRock B860M-H2 is a compact Micro-ATX motherboard built around the Intel B860 chipset and LGA1851 socket for Intel Core Ultra Series 2 processors. It uses dual-channel DDR5 memory with two DIMM slots, supporting up to 128GB and speeds up to 8333+ MT/s (OC), giving modern desktop builds a current-generation memory platform in a space-efficient board.Expansion is centred on one full-length PCIe 4.0 x16 slot for a graphics card, alongside two PCIe 4.0 x1 slots. Storage options include one PCIe Gen5 x4 Blazing M.2 socket, one PCIe Gen4 x4 Hyper M.2 socket and four SATA III connectors, allowing a practical mix of high-speed NVMe storage and conventional SATA drives. Dual HDMI 2.1 outputs are available when used with a processor featuring integrated graphics.Connectivity includes rear USB 3.2 Gen2x2 Type-C up to 20Gbps, front USB 3.2 Gen1 Type-C support, additional USB Type-A ports and Realtek Gigabit Ethernet. The Realtek ALC897 codec provides 7.1-channel HD audio, while BIOS Flashback allows firmware updates without a CPU or memory installed. The board does not include onboard Wi-Fi or Bluetooth, but an M.2 Key E slot and antenna mounting points allow an optional wireless module to be added. Brand ASRock Model B860M-H2 MPN 90-MXBS00-A0UAYZ Socket LGA 1851 Chipset Intel B860 Supported Processors Intel Core Ultra Series 2 Form Factor Micro-ATX Memory Technology DDR5 Memory Slots 2 × DIMM Maximum Memory 128GB Memory Speed Up to 8333+ MT/s (OC) PCIe x16 Slots 1 × PCIe x16 (PCIe 4.0 x16) M.2 Slots 2 SATA Ports 4 × SATA III Wireless Connectivity None LAN 1 Gigabit Ethernet Video Outputs 2 × HDMI 2.1 USB USB Type-A, USB Type-C Audio 7.1 Channel HD Audio
£91.00
-
LGA 1851 Z890 ATXDDR5 4× M.2 No Wi-FiASRock
ASRock Z890 Pro RS is an ATX Intel Z890 motherboard for the LGA 1851 platform and Intel Core Ultra Processors Series 2. Four DDR5 DIMM slots support up to 256GB, with ASRock listing memory overclocking up to 9066+ MT/s under suitable configurations. The CPU-connected graphics slot is PCIe 5.0 x16. Two additional long expansion slots are connected through the chipset at PCIe 4.0 x4, while a PCIe 4.0 x1 slot is available for smaller cards.Storage is built around four M.2 sockets and four SATA III ports. One M.2 socket supports PCIe 5.0 x4 and the remaining storage sockets provide PCIe 4.0 connectivity, with one also supporting SATA M.2 drives. Rear I/O includes two Thunderbolt 4/USB4 Type-C ports capable of up to 40Gb/s, along with USB Type-A connectivity. BIOS Flashback is included for firmware maintenance.This non-Wi-Fi Z890 Pro RS does not include a wireless module or Bluetooth, although an M.2 Key E socket is available for optional Wi-Fi/BT hardware. Wired networking is 2.5 Gigabit Ethernet. Display outputs include HDMI, DisplayPort and Thunderbolt 4 Type-C when used with a processor that provides integrated graphics. Audio is 7.1-channel HD audio using the Realtek ALC897 codec. Do not transfer Wi-Fi 6E specifications from the separate Z890 Pro RS WiFi model. Brand ASRock Model Z890 Pro RS MPN 90-MXBP10-A0UAYZ Socket LGA 1851 Chipset Intel Z890 Supported Processors Intel Core Ultra Series 2 Form Factor ATX Memory Technology DDR5 Memory Slots 4 × DIMM Maximum Memory 256GB Memory Speed Up to 9066+ MT/s (OC) PCIe x16 Slots 3 × PCIe x16 (PCIe 5.0 x16 / 2 × PCIe 4.0 x4) M.2 Slots 4 SATA Ports 4 × SATA III Wireless Connectivity None LAN 2.5 Gigabit Ethernet Video Outputs HDMI, DisplayPort, Thunderbolt 4 Type-C USB USB Type-A, USB Type-C Audio 7.1 Channel HD Audio
£200.00
-
LGA 1700 B760 ATXDDR5 3× M.2 No Wi-FiASRock
ASRock B760 Pro RS is an ATX Intel B760 motherboard for the LGA 1700 platform, supporting Intel Core 12th, 13th and 14th Gen desktop processors. This exact model uses DDR5 rather than DDR4, with four DIMM slots supporting up to 256GB and ASRock-listed speeds up to 7200+ MT/s when overclocked. The primary graphics slot is PCIe 5.0 x16, providing a full-width CPU-connected path for a discrete graphics card.Three physical x16-length connectors are present: the main PCIe 5.0 x16 slot, a chipset-connected PCIe 4.0 slot operating at x4 and another long connector operating at PCIe 3.0 x1. Storage includes three M.2 sockets and four SATA III ports. An M.2 Key E socket is available for an optional wireless module; it is not counted as an M.2 storage slot and does not mean Wi-Fi is included.The B760 Pro RS has no integrated Wi-Fi or Bluetooth. Wired networking is 2.5 Gigabit Ethernet. Rear display outputs include HDMI and DisplayPort for Intel processors with integrated graphics, while USB connectivity includes Type-A and Type-C. Audio is 7.1-channel HD audio and firmware is AMI UEFI. Do not confuse this product with B760 Pro RS/D4 or Wi-Fi variants, because memory technology and wireless hardware differ. Brand ASRock Model B760 Pro RS MPN 90-MXBKS0-A0UAYZ Socket LGA 1700 Chipset Intel B760 Supported Processors Intel Core 12th / 13th / 14th Gen Form Factor ATX Memory Technology DDR5 Memory Slots 4 × DIMM Maximum Memory 256GB Memory Speed Up to 7200+ MT/s (OC) PCIe x16 Slots 3 × PCIe x16 (PCIe 5.0 x16 / PCIe 4.0 x4 / PCIe 3.0 x1) M.2 Slots 3 SATA Ports 4 × SATA III Wireless Connectivity None LAN 2.5 Gigabit Ethernet Video Outputs HDMI, DisplayPort USB USB Type-A, USB Type-C Audio 7.1 Channel HD Audio
£109.65
-
AM5 B650 mATXDDR5 2× M.2 Wi-Fi 6ASUS
ASUS PRIME B650M-A WIFI II is a Micro-ATX AMD B650 motherboard for the AM5 platform, supporting Ryzen 7000, 8000 and 9000 Series desktop processors. Four DDR5 DIMM slots support up to 192GB, with ASUS listing overclocked speeds up to 7600+ MT/s. The primary PCIe x16-length slot operates at PCIe 4.0 x16 with supported Ryzen 7000 and 9000 processors; selected Ryzen 8000 models can reduce its available lane width.Storage comprises two M.2 sockets and four SATA III ports. The first M.2 socket supports PCIe 5.0 x4 with compatible processors, while the second provides PCIe 4.0 x4. The board also offers BIOS FlashBack and ASUS Q-LED diagnostics. Three physical PCIe x16-length connectors are present in total, although the two chipset-connected secondary slots operate electrically at x1.Integrated networking includes 2.5 Gigabit Ethernet, Wi-Fi 6 and Bluetooth 5.2. Rear display connectivity provides HDMI, DisplayPort and VGA for compatible processors with integrated graphics. USB support includes Type-A plus a front-panel Type-C header, and onboard audio provides 7.1-channel HD output. This WIFI II version should not be confused with non-Wi-Fi PRIME B650M-A models, which differ in wireless connectivity and may differ in board-level specifications. Brand ASUS Model PRIME B650M-A WIFI II MPN 90MB1EG0-M0EAY0 Socket AM5 Chipset AMD B650 Supported Processors AMD Ryzen 7XXX / 8XXX / 9XXX Series Form Factor Micro-ATX Memory Technology DDR5 Memory Slots 4 × DIMM Maximum Memory 192GB Memory Speed Up to 7600+ MT/s (OC) PCIe x16 Slots 3 × PCIe x16 (PCIe 4.0 x16 / PCIe 4.0 x1 / PCIe 4.0 x1) M.2 Slots 2 SATA Ports 4 × SATA III Wireless Connectivity Wi-Fi 6, Bluetooth 5.2 LAN 2.5 Gigabit Ethernet Video Outputs HDMI, DisplayPort, VGA USB USB Type-A, USB Type-C Audio 7.1 Channel HD Audio
£154.65
-
AM4 B550 ATXDDR4 2× M.2 No Wi-FiASUS
ASUS PRIME B550-PLUS is an ATX AMD B550 motherboard for the AM4 platform, supporting Ryzen 3000 Series, Ryzen 4000 G-Series and Ryzen 5000 Series desktop processors. Four DDR4 DIMM slots support up to 128GB, with the current ASUS specification listing memory overclocking up to 4600 MT/s. The main graphics slot can operate at PCIe 4.0 x16 with supported Ryzen 3000 and 5000 processors, while compatible G-Series processors use PCIe 3.0.Expansion includes two physical PCIe x16-length slots, with the secondary slot connected at PCIe 3.0 x4. Storage is provided by two M.2 sockets and six SATA III ports, allowing NVMe and SATA devices to be combined in one system. ASUS includes an M.2 heatsink, PCIe SafeSlot reinforcement, Q-LED diagnostics and UEFI BIOS features for assembly and troubleshooting.This model has no integrated Wi-Fi or Bluetooth. Wired networking is 1 Gigabit Ethernet, and rear connectivity includes USB Type-A and USB Type-C together with HDMI and DisplayPort for compatible processors with integrated graphics. Audio is 7.1-channel HD audio. The exact SKU is PRIME B550-PLUS, not PRIME B550-PLUS WIFI II or another similarly named PRIME B550 variant, so wireless features must not be assumed. Brand ASUS Model PRIME B550-PLUS MPN 90MB14U0-M0EAY0 Socket AM4 Chipset AMD B550 Supported Processors AMD Ryzen 3XXX / 4XXX G-Series / 5XXX Series Form Factor ATX Memory Technology DDR4 Memory Slots 4 × DIMM Maximum Memory 128GB Memory Speed Up to 4600 MT/s (OC) PCIe x16 Slots 2 × PCIe x16 (PCIe 4.0 x16 / PCIe 3.0 x4) M.2 Slots 2 SATA Ports 6 × SATA III Wireless Connectivity None LAN 1 Gigabit Ethernet Video Outputs HDMI, DisplayPort USB USB Type-A, USB Type-C Audio 7.1 Channel HD Audio
£124.56 £110.00
-
AM5 X870 ATXDDR5 3× M.2 Wi-Fi 7ASRock
ASRock X870 Pro RS WiFi is an ATX AMD X870 motherboard for the AM5 platform, supporting AMD Ryzen 9000, 8000 and 7000 Series desktop processors. Four DDR5 DIMM slots support up to 256GB, with ASRock listing speeds up to 8000+ MT/s when overclocked. The primary graphics slot is PCIe 5.0 x16 with supported Ryzen 9000 and 7000 processors; selected Ryzen 8000 models can operate it at reduced lane width or generation.Storage includes three M.2 sockets plus four SATA III ports. The main M.2 socket is PCIe 5.0 x4, with additional PCIe 4.0 and PCIe 3.0/SATA-capable M.2 connectivity for further drives. ASRock adds a toolless multi-layer M.2 heatsink, an M.2 bottom heatsink and BIOS Flashback. Two rear USB4 Type-C ports provide up to 40Gb/s connectivity and can carry display output with a processor that provides integrated graphics.Integrated networking consists of 2.5 Gigabit Ethernet, Wi-Fi 7 and Bluetooth 5.4. Rear display options include HDMI and USB4 Type-C, while other USB connectivity covers Type-A and Type-C. The board uses 7.1-channel HD audio with a Realtek ALC1220 codec. This is the X870 Pro RS WiFi model; its wireless hardware and storage configuration should not be transferred to non-Wi-Fi or other Pro RS variants. Brand ASRock Model X870 Pro RS WiFi MPN 90-MXBQ00-A0UAYZ Socket AM5 Chipset AMD X870 Supported Processors AMD Ryzen 7XXX / 8XXX / 9XXX Series Form Factor ATX Memory Technology DDR5 Memory Slots 4 × DIMM Maximum Memory 256GB Memory Speed Up to 8000+ MT/s (OC) PCIe x16 Slots 2 × PCIe x16 (PCIe 5.0 x16 / PCIe 4.0 x4) M.2 Slots 3 SATA Ports 4 × SATA III Wireless Connectivity Wi-Fi 7, Bluetooth 5.4 LAN 2.5 Gigabit Ethernet Video Outputs HDMI, USB4 Type-C USB USB Type-A, USB Type-C Audio 7.1 Channel HD Audio
£197.99
You have seen 72 out of 207 products