Kingston RAM and memory storage, including FURY DDR4 and DDR5 memory, SD and microSD cards, USB flash drives and SSDs for PCs, laptops and other devices.
Kingston
-
32GB DDR5 5600MT/sCL36 1×32GB UDIMMKingston
Kingston FURY Beast RGB 32GB DDR5 computer memory is supplied as 1 x 32GB, with 1 module rated at 32GB capacity. The 288-pin unbuffered DIMM design operates at a rated 5600MT/s with CL36 CAS latency. A single high-capacity module leaves another slot available if the computer supports the configuration.The 2Rx8 organisation is specified for this single module, while Kingston's Infrared Sync Technology helps synchronise its RGB light bar. This is one 32GB DIMM, not a two-module kit; channel configuration depends on the other installed memory. Kingston FURY Beast RGB also provides addressable RGB lighting, letting a visible memory installation form part of a coordinated desktop build.AMD EXPO and Intel XMP 3.0 performance profiles are provided for suitable hardware; select a supported profile in BIOS to target the rated speed. Actual memory speed depends on the CPU memory controller, motherboard firmware and populated slots; check the board memory list. This DDR5 288-pin unbuffered DIMM configuration must not be mixed up with a SO-DIMM or a differently specified kit. The 1-module layout distinguishes this model from neighbouring capacities in the same product family. Check the exact manufacturer part number before ordering. Brand Kingston Model KF556C36BBEA-32 Total Capacity 32GB Capacity per Module 32GB Kit Configuration 1 x 32GB Memory Type DDR5 Speed 5600MT/s CAS Latency CL36 Form Factor UDIMM Primary Timings 36-38-38 ECC Non-ECC Buffered Type Unbuffered Voltage 1.25V XMP Intel XMP 3.0 AMD EXPO Yes RGB Yes Colour Black
£488.00
-
32GB DDR5 6400MHzCL32 1×32GB UDIMMKingston
Kingston FURY Renegade RGB 32GB is the KF564C32RSA-32 configuration: 1 x 32GB DDR5 UDIMM memory rated at 6400MHz with CL32 latency. It contains 1 module of 32GB each, giving a confirmed total capacity of 32GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 32GB module provides the complete 32GB capacity for a compatible replacement or controlled memory upgrade. Its 6400MHz rating is the specified speed class for this SKU, paired with confirmed CL32 CAS latency. Operating voltage is specified as 1.4V. Intel XMP profile support is confirmed for compatible platforms. The confirmed design includes a heat spreader.Compatibility requires a desktop PC that supports DDR5 UDIMM memory, 32GB per module and the complete 1 x 32GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 32GB is the combined capacity of the complete product, while 32GB is the capacity of each module. Brand Kingston Model KF564C32RSA-32 Total Capacity 32GB Capacity per Module 32GB Kit Configuration 1 x 32GB Memory Type DDR5 Speed 6400MHz CAS Latency CL32 Form Factor UDIMM Voltage 1.4V XMP Yes RGB Yes Colour Black/Silver
£424.00
-
1024GB SATA III 2.5"Read 550 Write 520Kingston
Kingston KC600 1024GB is a 2.5-inch internal SATA SSD built around a Silicon Motion SM2259 controller, 3D TLC NAND and dedicated DRAM cache. Its 7 mm casing fits compatible laptop and desktop drive bays, while the SATA Rev. 3.0 (6 Gb/s) interface supports backwards compatibility with SATA Rev. 2.0. Kingston rates this model for sequential reads up to 550 MB/s and writes up to 520 MB/s, helping reduce boot, application-loading and file-transfer times when upgrading from a mechanical hard drive.The 1024GB configuration is rated for 600 TBW endurance. Maximum 4K random performance reaches up to 90,000 read IOPS and 80,000 write IOPS, supporting responsive use when operating system tasks and applications compete for storage access. The KC600 offers XTS-AES 256-bit hardware encryption together with TCG Opal 2.0 and eDrive support, providing security features for appropriately configured systems.Kingston includes access to Acronis drive-cloning software to simplify migration from an existing disk, and specifies a five-year limited warranty. The drive requires a compatible 2.5-inch SATA connector and sufficient mounting clearance; check the host system before installation. Brand Kingston Model SKC600/1024G Capacity 1024GB Drive Type Internal SATA SSD Form Factor 2.5-inch SATA Interface SATA III 6 Gb/s SATA Revision SATA Rev. 3.0 Drive Thickness 7 mm Max Sequential Read Speed Up to 550 MB/s Max Sequential Write Speed Up to 520 MB/s Random Read IOPS Up to 90,000 IOPS Random Write IOPS Up to 80,000 IOPS NAND Type 3D TLC DRAM Cache Yes Endurance / TBW 600 TBW Hardware Encryption XTS-AES 256-bit; TCG Opal 2.0; eDrive Colour Black UPC 740617300116
£270.00
-
512GB SATA III 2.5"Read 550 Write 520Kingston
Kingston KC600 512GB is an internal 2.5-inch SATA SSD designed for compatible notebook and desktop computers. It combines a Silicon Motion SM2259 controller, 3D TLC NAND and a DRAM cache in a slim 7 mm drive casing. The SATA Rev. 3.0 (6 Gb/s) connection is backwards compatible with SATA Rev. 2.0. Sequential performance is rated at up to 550 MB/s read and 520 MB/s write, making it useful for improving system start-up, application loading and everyday file transfers compared with a traditional hard drive.For the 512GB version, Kingston specifies an endurance rating of 300 TBW, so it should not be confused with the higher rating of larger KC600 capacities. Maximum 4K random read and write performance reaches up to 90,000 and 80,000 IOPS respectively. Security features include XTS-AES 256-bit hardware encryption, TCG Opal 2.0 and eDrive, allowing compatible systems to use hardware-based drive protection.The KC600 is supplied with access to Acronis cloning software for migrating an existing installation and carries a five-year limited Kingston warranty. To install this 2.5-inch internal SSD, the computer needs a compatible SATA connection and a bay with adequate space for its 7 mm height. Brand Kingston Model SKC600/512G Capacity 512GB Drive Type Internal SATA SSD Form Factor 2.5-inch SATA Interface SATA III 6 Gb/s SATA Revision SATA Rev. 3.0 Drive Thickness 7 mm Max Sequential Read Speed Up to 550 MB/s Max Sequential Write Speed Up to 520 MB/s Random Read IOPS Up to 90,000 IOPS Random Write IOPS Up to 80,000 IOPS NAND Type 3D TLC DRAM Cache Yes Endurance / TBW 300 TBW Hardware Encryption XTS-AES 256-bit; TCG Opal 2.0; eDrive Colour Black UPC 740617300253
£161.00
-
Kingston
Kingston 256GB is a full-size SDXC memory card using the UHS-I interface. Manufacturer part number SDA10/256GB identifies this exact capacity in Kingston's Class 10 UHS-I range, with rated transfer performance of up to 90 MB/s read and 45 MB/s write. The 256GB capacity provides substantial removable storage for compatible SDXC cameras and other hosts while retaining the standard full-size SD card format.Class 10 is the card's sustained-speed classification, while the published 90 MB/s read and 45 MB/s write values are separate maximum transfer figures. UHS-I identifies the bus used by the card and should not be confused with the speed class. These details are especially important for discontinued or older Kingston ranges, where similar packaging and names can hide different controller generations, capacities or performance specifications.Actual performance depends on the host device, reader, file sizes and workload, so the maximum transfer figures are not guaranteed in every system. A device must support SDXC media and the card's capacity to use it correctly. This listing therefore anchors the product to the SDA10/256GB part number, 256GB SDXC format, UHS-I interface and confirmed 90/45 MB/s performance rather than borrowing data from another Kingston SD card. Brand Kingston Model SDA10/256GB Capacity 256GB Card Format SD Card Standard SDXC Bus / Interface UHS-I Speed Class Class 10 Max Read Speed Up to 90 MB/s Max Write Speed Up to 45 MB/s Colour Black/Gold EAN / UPC 740617236675
£153.59 £59.00
-
Kingston
Kingston Action Camera 64GB is a microSDXC memory card developed for high-bitrate recording in compatible action cameras and drones. The exact SDCAC/64GB model uses the UHS-I bus and U3 speed class, with manufacturer performance rated at up to 90 MB/s read and 45 MB/s write. Its 64GB capacity uses the microSDXC standard and the package includes a full-size SD adapter for supported readers and SD slots.The U3 rating identifies a sustained write performance class suitable for demanding video capture, while the published 90 MB/s read and 45 MB/s write figures are separate maximum transfer specifications. Kingston positioned the SDCAC range for 4K recording and high-frame-rate Full HD in compatible equipment. Actual performance still depends on the camera, reader, file pattern and workload.This card is specified as waterproof, shock and vibration proof, X-ray proof and temperature proof, supporting use in harsher recording environments. Its operating range is -25°C to 85°C. The supplied adapter changes only the slot format and does not alter the card's microSDXC type or UHS-I U3 performance. This listing refers specifically to Kingston SDCAC/64GB with UPC 740617251883. Brand Kingston Model SDCAC/64GB Capacity 64GB Card Format microSD Card Standard SDXC Bus / Interface UHS-I Speed Class Class 10 UHS Speed Class U3 Max Read Speed Up to 90 MB/s Max Write Speed Up to 45 MB/s Colour Black/White EAN / UPC 740617251883
£38.00 £25.00
-
Kingston
Kingston 128GB microSDXC is a UHS-I memory card identified by manufacturer part number SDC10G2/128GBSP. This exact model carries Class 10 and U1 ratings and is specified for transfer speeds of up to 45 MB/s read and 10 MB/s write. The 128GB capacity provides removable storage in compatible microSDXC devices without changing the card's original microSD form factor.UHS-I is the interface generation, while U1 and Class 10 are sustained-performance classifications. Kingston's 45 MB/s read and 10 MB/s write figures are separate maximum transfer specifications, so they should not be inferred from the class symbols themselves. This matters for an older card such as the SDC10G2 series because neighbouring Kingston products can use similar naming while offering different speeds, capacities or package contents.Kingston specifies resistance to water, shock, vibration, X-rays and temperature extremes for this card family, supporting everyday use and transport. Actual performance depends on the host device, reader, file pattern and workload, and a compatible microSDXC slot is required for the 128GB SDXC capacity. This listing refers specifically to SDC10G2/128GBSP and does not borrow specifications from another Kingston microSD generation. Brand Kingston Model SDC10G2/128GBSP Capacity 128GB Card Format microSD Card Standard SDXC Bus / Interface UHS-I Speed Class Class 10 UHS Speed Class U1 Max Read Speed Up to 45 MB/s Max Write Speed Up to 10 MB/s
£35.00
-
32GB DDR5 5600MHzCL40 1×32GB UDIMMKingston
Kingston FURY Beast RGB is a 32GB DDR5 memory module configured as 1 x 32GB, rated at 5600MHz with CL40 latency. The exact KF556C40BBA-32 SKU uses the UDIMM form factor for desktop PCs. Each module provides 32GB, so 32GB is the total capacity supplied. This identifies the exact computer memory configuration rather than a similar model from the same product family.Key advantages of this model include Intel XMP 3.0, RGB lighting, 2Rx8 organisation, and black heat spreader. The 5600MHz rating and CL40 latency define the memory specification, while the 1 x 32GB layout provides 32GB total capacity. The single-module layout is useful where one compatible slot is available or this per-module capacity is required. Intel XMP 3.0 provides defined memory profiles for compatible platforms.Installation requires a motherboard and processor that support DDR5 UDIMM memory, the module capacity and the relevant speed. Profile-enabled operation is platform-dependent, because the final rate can be affected by the CPU memory controller, motherboard, BIOS and installed memory configuration. The confirmed 1.25V voltage and exact KF556C40BBA-32 model help ensure the intended specification is matched before purchase. Brand Kingston Model KF556C40BBA-32 Total Capacity 32GB Capacity per Module 32GB Kit Configuration 1 x 32GB Memory Type DDR5 Speed 5600MHz CAS Latency CL40 Primary Timings 40-40-40 Form Factor UDIMM ECC Non-ECC Buffered Type Unbuffered Rank 2Rx8 Voltage 1.25V XMP Intel XMP 3.0 RGB Yes Colour Black
£683.00
-
32GB DDR5 4800MHzCL40 1×32GB UDIMMKingston
Kingston Branded Memory is a 32GB DDR5 memory module configured as 1 x 32GB, rated at 4800MHz with CL40 latency. The exact KCP548UD8-32 SKU uses the UDIMM form factor for compatible desktop PCs. Each module provides 32GB, so 32GB is the total capacity supplied. This identifies the exact computer memory configuration rather than a similar model from the same product family.Key advantages of this model include high 32GB capacity in one module, 2Rx8 organisation, and 1.1V operation. The 4800MHz rating and CL40 latency define the memory specification, while the 1 x 32GB layout provides 32GB total capacity. The single-module layout is useful where one compatible slot is available or this per-module capacity is required.Installation requires a motherboard and processor that support DDR5 UDIMM memory, the module capacity and the relevant speed. Profile-enabled operation is platform-dependent, because the final rate can be affected by the CPU memory controller, motherboard, BIOS and installed memory configuration. The confirmed 1.1V voltage and exact KCP548UD8-32 model help ensure the intended specification is matched before purchase. Brand Kingston Model KCP548UD8-32 Total Capacity 32GB Capacity per Module 32GB Kit Configuration 1 x 32GB Memory Type DDR5 Speed 4800MHz CAS Latency CL40 Form Factor UDIMM ECC Non-ECC Buffered Type Unbuffered Rank 2Rx8 Voltage 1.1V RGB No Colour Green
£498.00
-
128GB DDR4 2400MHzCL17 4×32GB LRDIMMKingston
Kingston ValueRAM is a 128GB DDR4 memory kit configured as 4 x 32GB, rated at 2400MHz with CL17 latency. The exact KVR24L17Q4K4/128 SKU uses the LRDIMM form factor for supported servers and workstations. Each module provides 32GB, so 128GB is the total capacity supplied. This identifies the exact computer memory configuration rather than a similar model from the same product family.The key features are ECC memory, load-reduced LRDIMM design, 4Rx4 organisation, and four 32GB modules. System-level ECC is intended to detect and correct supported memory errors, while the load-reduced design is made for platforms that specifically accept LRDIMMs. The four-module layout provides high aggregate capacity, and the 2400MHz CL17 specification applies to this exact kit. Its 1.2V operating voltage and 4Rx4 organisation are also confirmed.This is specialist server RAM and is not interchangeable with ordinary desktop UDIMM memory. The host must support DDR4 LRDIMM, ECC, the per-module capacity and the required rank organisation. Maximum memory, slot population rules and final operating speed depend on the server or workstation platform, so the system manual should be checked before installation. Brand Kingston Model KVR24L17Q4K4/128 Total Capacity 128GB Capacity per Module 32GB Kit Configuration 4 x 32GB Memory Type DDR4 Speed 2400MHz CAS Latency CL17 Primary Timings 17-17-17 Form Factor LRDIMM ECC ECC Buffered Type Load Reduced Rank 4Rx4 Voltage 1.2V RGB No Colour Green
£1,730.99 £799.00
-
32GB DDR4 2666MHzCL15 2×16GB SO-DIMMKingston
Kingston HyperX Impact 32GB is the HX426S15IB2K2/32 configuration: 2 x 16GB DDR4 SO-DIMM memory rated at 2666MHz with CL15 latency. It contains 2 matched modules of 16GB each, giving a confirmed total capacity of 32GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The 2 x 16GB kit provides the full 32GB as one defined configuration, with 16GB on each module. Its 2666MHz rating is the specified speed class for this SKU, paired with confirmed CL15 CAS latency. Operating voltage is specified as 1.2V.Compatibility requires a laptop or compact computer that supports DDR4 SO-DIMM memory, 16GB per module and the complete 2 x 16GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 32GB is the combined capacity of the complete product, while 16GB is the capacity of each module. The 2 x 16GB kit also requires enough compatible memory slots for all 2 modules. Brand Kingston Model HX426S15IB2K2/32 Total Capacity 32GB Capacity per Module 16GB Kit Configuration 2 x 16GB Memory Type DDR4 Speed 2666MHz CAS Latency CL15 Form Factor SO-DIMM Voltage 1.2V Colour Black
£249.00
-
4GB DDR3 1600MHzCL10 1×4GB UDIMMKingston
Kingston HyperX FURY 4GB is the HX316C10FR/4 configuration: 1 x 4GB DDR3 UDIMM memory rated at 1600MHz with CL10 latency. It contains 1 module of 4GB each, giving a confirmed total capacity of 4GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 4GB module provides the complete 4GB capacity for a compatible replacement or controlled memory upgrade. Its 1600MHz rating is the specified speed class for this SKU, paired with confirmed CL10 CAS latency. Operating voltage is specified as 1.5V.Compatibility requires a desktop PC that supports DDR3 UDIMM memory, 4GB per module and the complete 1 x 4GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 4GB is the combined capacity of the complete product, while 4GB is the capacity of each module. Brand Kingston Model HX316C10FR/4 Total Capacity 4GB Capacity per Module 4GB Kit Configuration 1 x 4GB Memory Type DDR3 Speed 1600MHz CAS Latency CL10 Form Factor UDIMM Voltage 1.5V Colour Red
£46.03 £30.00
-
8GB DDR3 1600MHzCL10 2×4GB UDIMMKingston
Kingston HyperX FURY 8GB is the HX316C10FRK2/8 configuration: 2 x 4GB DDR3 UDIMM memory rated at 1600MHz with CL10 latency. It contains 2 matched modules of 4GB each, giving a confirmed total capacity of 8GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The 2 x 4GB kit provides the full 8GB as one defined configuration, with 4GB on each module. Its 1600MHz rating is the specified speed class for this SKU, paired with confirmed CL10 CAS latency. Operating voltage is specified as 1.5V.Compatibility requires a desktop PC that supports DDR3 UDIMM memory, 4GB per module and the complete 2 x 4GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 8GB is the combined capacity of the complete product, while 4GB is the capacity of each module. The 2 x 4GB kit also requires enough compatible memory slots for all 2 modules. Brand Kingston Model HX316C10FRK2/8 Total Capacity 8GB Capacity per Module 4GB Kit Configuration 2 x 4GB Memory Type DDR3 Speed 1600MHz CAS Latency CL10 Form Factor UDIMM Voltage 1.5V Colour Red
£81.99 £75.00
-
2GB DDR2 667MHz1×2GB SO-DIMMKingston
Kingston System Specific 2GB is the KTL-TP667/2G configuration: 1 x 2GB DDR2 SO-DIMM memory rated at 667MHz. It contains 1 module of 2GB each, giving a confirmed total capacity of 2GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 2GB module provides the complete 2GB capacity for a compatible replacement or controlled memory upgrade. Its 667MHz rating is the specified speed class for this SKU.Compatibility requires a laptop or compact computer that supports DDR2 SO-DIMM memory, 2GB per module and the complete 1 x 2GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 2GB is the combined capacity of the complete product, while 2GB is the capacity of each module. For installation planning, the SO-DIMM form factor, DDR2 generation and 2GB module capacity should all be checked rather than relying on total capacity alone. Brand Kingston Model KTL-TP667/2G Total Capacity 2GB Capacity per Module 2GB Kit Configuration 1 x 2GB Memory Type DDR2 Speed 667MHz Form Factor SO-DIMM
£38.99 £25.00
-
1GB DDR2 667MHzCL5 1×1GB SO-DIMMKingston
Kingston System Specific 1GB is the KTA-MB667/1G configuration: 1 x 1GB DDR2 SO-DIMM memory rated at 667MHz with CL5 latency. It contains 1 module of 1GB each, giving a confirmed total capacity of 1GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 1GB module provides the complete 1GB capacity for a compatible replacement or controlled memory upgrade. Its 667MHz rating is the specified speed class for this SKU, paired with confirmed CL5 CAS latency. Operating voltage is specified as 1.8V.Compatibility requires a laptop or compact computer that supports DDR2 SO-DIMM memory, 1GB per module and the complete 1 x 1GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 1GB is the combined capacity of the complete product, while 1GB is the capacity of each module. This SKU is associated with Mac systems, so those platform requirements should be checked before installation. Brand Kingston Model KTA-MB667/1G Total Capacity 1GB Capacity per Module 1GB Kit Configuration 1 x 1GB Memory Type DDR2 Speed 667MHz CAS Latency CL5 Form Factor SO-DIMM Voltage 1.8V
£20.99 £9.99
-
32GB DDR3 1333MHzCL9 4×8GB UDIMMKingston
Kingston ValueRAM 32GB is the KVR1333D3N9K4/32G configuration: 4 x 8GB DDR3 UDIMM memory rated at 1333MHz with CL9 latency. It contains 4 matched modules of 8GB each, giving a confirmed total capacity of 32GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The 4 x 8GB kit provides the full 32GB as one defined configuration, with 8GB on each module. Its 1333MHz rating is the specified speed class for this SKU, paired with confirmed CL9 CAS latency. Operating voltage is specified as 1.5V. The module is specified as unbuffered memory.Compatibility requires a desktop PC that supports DDR3 UDIMM memory, 8GB per module and the complete 4 x 8GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 32GB is the combined capacity of the complete product, while 8GB is the capacity of each module. The 4 x 8GB kit also requires enough compatible memory slots for all 4 modules. Brand Kingston Model KVR1333D3N9K4/32G Total Capacity 32GB Capacity per Module 8GB Kit Configuration 4 x 8GB Memory Type DDR3 Speed 1333MHz CAS Latency CL9 Form Factor UDIMM ECC Non-ECC Buffered Type Unbuffered Voltage 1.5V
£242.39 £189.00
-
1GB DDR2 667MHzCL5 1×1GB UDIMMKingston
Kingston System Specific 1GB is the KTD-DM8400B/1G configuration: 1 x 1GB DDR2 UDIMM memory rated at 667MHz with CL5 latency. It contains 1 module of 1GB each, giving a confirmed total capacity of 1GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 1GB module provides the complete 1GB capacity for a compatible replacement or controlled memory upgrade. Its 667MHz rating is the specified speed class for this SKU, paired with confirmed CL5 CAS latency.Compatibility requires a desktop PC that supports DDR2 UDIMM memory, 1GB per module and the complete 1 x 1GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 1GB is the combined capacity of the complete product, while 1GB is the capacity of each module. For installation planning, the UDIMM form factor, DDR2 generation and 1GB module capacity should all be checked rather than relying on total capacity alone. Brand Kingston Model KTD-DM8400B/1G Total Capacity 1GB Capacity per Module 1GB Kit Configuration 1 x 1GB Memory Type DDR2 Speed 667MHz CAS Latency CL5 Form Factor UDIMM
£20.99 £15.00
-
32GB DDR5 6000MHzCL36 2×16GB UDIMMKingston
Kingston FURY Beast RGB 32GB is the KF560C36BBE2AK2-32 configuration: 2 x 16GB DDR5 UDIMM memory rated at 6000MHz with CL36 latency. It contains 2 matched modules of 16GB each, giving a confirmed total capacity of 32GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The 2 x 16GB kit provides the full 32GB as one defined configuration, with 16GB on each module. Its 6000MHz rating is the specified speed class for this SKU, paired with confirmed CL36 CAS latency. Operating voltage is specified as 1.35V. Intel XMP and AMD EXPO profiles are both supported on compatible platforms.Compatibility requires a desktop PC that supports DDR5 UDIMM memory, 16GB per module and the complete 2 x 16GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 32GB is the combined capacity of the complete product, while 16GB is the capacity of each module. The 2 x 16GB kit also requires enough compatible memory slots for all 2 modules. Brand Kingston Model KF560C36BBE2AK2-32 Total Capacity 32GB Capacity per Module 16GB Kit Configuration 2 x 16GB Memory Type DDR5 Speed 6000MHz CAS Latency CL36 Form Factor UDIMM Voltage 1.35V XMP Yes AMD EXPO Yes RGB Yes Colour Black
£609.00
-
4GB DDR3 1600MHz1×4GB RDIMMKingston
Kingston System Specific 4GB is the KTH-PL316S8/4G configuration: 1 x 4GB DDR3 RDIMM memory rated at 1600MHz. It contains 1 module of 4GB each, giving a confirmed total capacity of 4GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 4GB module provides the complete 4GB capacity for a compatible replacement or controlled memory upgrade. Its 1600MHz rating is the specified speed class for this SKU. ECC error correction is part of this module specification. It is Registered memory and requires a platform that supports RDIMM modules. Confirmed rank organisation is Single Rank.Compatibility requires a server or workstation that supports DDR3 RDIMM memory, 4GB per module and the complete 1 x 4GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 4GB is the combined capacity of the complete product, while 4GB is the capacity of each module. Brand Kingston Model KTH-PL316S8/4G Total Capacity 4GB Capacity per Module 4GB Kit Configuration 1 x 4GB Memory Type DDR3 Speed 1600MHz Form Factor RDIMM ECC ECC Buffered Type Registered Rank Single Rank
£44.99 £35.00
-
8GB DDR3 1600MHz1×8GB RDIMMKingston
Kingston System Specific 8GB is the KTH-PL316S/8G configuration: 1 x 8GB DDR3 RDIMM memory rated at 1600MHz. It contains 1 module of 8GB each, giving a confirmed total capacity of 8GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 8GB module provides the complete 8GB capacity for a compatible replacement or controlled memory upgrade. Its 1600MHz rating is the specified speed class for this SKU. ECC error correction is part of this module specification. It is Registered memory and requires a platform that supports RDIMM modules. Confirmed rank organisation is Single Rank.Compatibility requires a server or workstation that supports DDR3 RDIMM memory, 8GB per module and the complete 1 x 8GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 8GB is the combined capacity of the complete product, while 8GB is the capacity of each module. Brand Kingston Model KTH-PL316S/8G Total Capacity 8GB Capacity per Module 8GB Kit Configuration 1 x 8GB Memory Type DDR3 Speed 1600MHz Form Factor RDIMM ECC ECC Buffered Type Registered Rank Single Rank
£82.99 £69.00
-
2GB DDR2 800MHzCL6 1×2GB SO-DIMMKingston
Kingston System Specific 2GB is the KTH-ZD8000C6/2G configuration: 1 x 2GB DDR2 SO-DIMM memory rated at 800MHz with CL6 latency. It contains 1 module of 2GB each, giving a confirmed total capacity of 2GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 2GB module provides the complete 2GB capacity for a compatible replacement or controlled memory upgrade. Its 800MHz rating is the specified speed class for this SKU, paired with confirmed CL6 CAS latency. Operating voltage is specified as 1.8V. The module is specified as unbuffered memory.Compatibility requires a laptop or compact computer that supports DDR2 SO-DIMM memory, 2GB per module and the complete 1 x 2GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 2GB is the combined capacity of the complete product, while 2GB is the capacity of each module. Brand Kingston Model KTH-ZD8000C6/2G Total Capacity 2GB Capacity per Module 2GB Kit Configuration 1 x 2GB Memory Type DDR2 Speed 800MHz CAS Latency CL6 Form Factor SO-DIMM ECC Non-ECC Buffered Type Unbuffered Voltage 1.8V
£38.99 £25.00
-
32GB DDR3L 1600MHz1×32GB LRDIMMKingston
Kingston System Specific 32GB is the KTH-PL316LLQ/32G configuration: 1 x 32GB DDR3L LRDIMM memory rated at 1600MHz. It contains 1 module of 32GB each, giving a confirmed total capacity of 32GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 32GB module provides the complete 32GB capacity for a compatible replacement or controlled memory upgrade. Its 1600MHz rating is the specified speed class for this SKU. Operating voltage is specified as 1.35V. ECC error correction is part of this module specification. It is Load Reduced memory and requires a platform that supports LRDIMM modules. Confirmed rank organisation is Quad Rank.Compatibility requires a server or workstation that supports DDR3L LRDIMM memory, 32GB per module and the complete 1 x 32GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 32GB is the combined capacity of the complete product, while 32GB is the capacity of each module. Brand Kingston Model KTH-PL316LLQ/32G Total Capacity 32GB Capacity per Module 32GB Kit Configuration 1 x 32GB Memory Type DDR3L Speed 1600MHz Form Factor LRDIMM ECC ECC Buffered Type Load Reduced Rank Quad Rank Voltage 1.35V
£469.99 £249.00
-
16GB DDR3 1866MHz1×16GB RDIMMKingston
Kingston System Specific 16GB is the KTL-TS318/16G configuration: 1 x 16GB DDR3 RDIMM memory rated at 1866MHz. It contains 1 module of 16GB each, giving a confirmed total capacity of 16GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 16GB module provides the complete 16GB capacity for a compatible replacement or controlled memory upgrade. Its 1866MHz rating is the specified speed class for this SKU. ECC error correction is part of this module specification. It is Registered memory and requires a platform that supports RDIMM modules.Compatibility requires a server or workstation that supports DDR3 RDIMM memory, 16GB per module and the complete 1 x 16GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 16GB is the combined capacity of the complete product, while 16GB is the capacity of each module. Brand Kingston Model KTL-TS318/16G Total Capacity 16GB Capacity per Module 16GB Kit Configuration 1 x 16GB Memory Type DDR3 Speed 1866MHz Form Factor RDIMM ECC ECC Buffered Type Registered Voltage 1.5V
£15.00
-
2GB DDR2 667MHz1×2GB UDIMMKingston
Kingston System Specific 2GB is the KTH-XW4300/2G configuration: 1 x 2GB DDR2 UDIMM memory rated at 667MHz. It contains 1 module of 2GB each, giving a confirmed total capacity of 2GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 2GB module provides the complete 2GB capacity for a compatible replacement or controlled memory upgrade. Its 667MHz rating is the specified speed class for this SKU.Compatibility requires a desktop PC that supports DDR2 UDIMM memory, 2GB per module and the complete 1 x 2GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 2GB is the combined capacity of the complete product, while 2GB is the capacity of each module. For installation planning, the UDIMM form factor, DDR2 generation and 2GB module capacity should all be checked rather than relying on total capacity alone. Brand Kingston Model KTH-XW4300/2G Total Capacity 2GB Capacity per Module 2GB Kit Configuration 1 x 2GB Memory Type DDR2 Speed 667MHz Form Factor UDIMM ECC Non-ECC
£37.99 £19.00
You have seen 24 out of 48 products