DIMM DDR3

G.SKILL Ripjaws Z is a 16GB DDR3 memory kit configured as 4 x 4GB, rated at 1866MHz with CL9 latency. The exact F3-14900CL9Q-16GBZL SKU uses the UDIMM form factor for compatible desktop PCs. Each module provides 4GB, so 16GB is the total capacity supplied. This identifies the exact computer memory configuration rather than a similar model from the same product family.Key advantages of this model include four-module matched kit, CL9 timing, Intel XMP support, and Ripjaws Z heat spreaders. The 1866MHz rating and CL9 latency define the memory specification, while the 4 x 4GB layout provides 16GB total capacity. The modules are supplied together as one matched kit for this SKU. Intel XMP provides defined memory profiles for compatible platforms.Installation requires a motherboard and processor that support DDR3 UDIMM memory, the module capacity and the relevant speed. Profile-enabled operation is platform-dependent, because the final rate can be affected by the CPU memory controller, motherboard, BIOS and installed memory configuration. The confirmed 1.5V voltage and exact F3-14900CL9Q-16GBZL model help ensure the intended specification is matched before purchase. Brand G.SKILL Model F3-14900CL9Q-16GBZL Total Capacity 16GB Capacity per Module 4GB Kit Configuration 4 x 4GB Memory Type DDR3 Speed 1866MHz CAS Latency CL9 Primary Timings 9-10-9-28 Form Factor UDIMM Voltage 1.5V XMP Intel XMP RGB No Colour Black

Read more less

Corsair Vengeance Blue is a 4GB DDR3 memory module configured as 1 x 4GB, rated at 1600MHz with CL9 latency. The exact CMZ4GX3M1A1600C9B SKU uses the UDIMM form factor for compatible desktop PCs. Each module provides 4GB, so 4GB is the total capacity supplied. This identifies the exact computer memory configuration rather than a similar model from the same product family.Key advantages of this model include blue aluminium heat spreader, Intel XMP support, and single 4GB desktop module. The 1600MHz rating and CL9 latency define the memory specification, while the 1 x 4GB layout provides 4GB total capacity. The single-module layout is useful where one compatible slot is available or this per-module capacity is required. Intel XMP provides defined memory profiles for compatible platforms.Installation requires a motherboard and processor that support DDR3 UDIMM memory, the module capacity and the relevant speed. Profile-enabled operation is platform-dependent, because the final rate can be affected by the CPU memory controller, motherboard, BIOS and installed memory configuration. The confirmed 1.5V voltage and exact CMZ4GX3M1A1600C9B model help ensure the intended specification is matched before purchase. Brand Corsair Model CMZ4GX3M1A1600C9B Total Capacity 4GB Capacity per Module 4GB Kit Configuration 1 x 4GB Memory Type DDR3 Speed 1600MHz CAS Latency CL9 Primary Timings 9-9-9-24 Form Factor UDIMM ECC Non-ECC Buffered Type Unbuffered Voltage 1.5V XMP Intel XMP RGB No Colour Blue

Read more less

Corsair Vengeance Low Profile is an 8GB DDR3 memory kit configured as 2 x 4GB, rated at 1600MHz with CL9 latency. The exact CML8GX3M2A1600C9 SKU uses the UDIMM form factor for compatible desktop PCs. Each module provides 4GB, so 8GB is the total capacity supplied. This identifies the exact computer memory configuration rather than a similar model from the same product family.Key advantages of this model include low-profile heat spreader, matched two-module kit, and Intel XMP support. The 1600MHz rating and CL9 latency define the memory specification, while the 2 x 4GB layout provides 8GB total capacity. The modules are supplied together as one matched kit for this SKU. Intel XMP provides defined memory profiles for compatible platforms.Installation requires a motherboard and processor that support DDR3 UDIMM memory, the module capacity and the relevant speed. Profile-enabled operation is platform-dependent, because the final rate can be affected by the CPU memory controller, motherboard, BIOS and installed memory configuration. The confirmed 1.5V voltage and exact CML8GX3M2A1600C9 model help ensure the intended specification is matched before purchase. Brand Corsair Model CML8GX3M2A1600C9 Total Capacity 8GB Capacity per Module 4GB Kit Configuration 2 x 4GB Memory Type DDR3 Speed 1600MHz CAS Latency CL9 Primary Timings 9-9-9-24 Form Factor UDIMM ECC Non-ECC Buffered Type Unbuffered Voltage 1.5V XMP Intel XMP RGB No Colour Black

Read more less

Corsair XMS3 4GB is the CMX4GX3M1A1600C9 configuration: 1 x 4GB DDR3 UDIMM memory rated at 1600MHz with CL9 latency. It contains 1 module of 4GB each, giving a confirmed total capacity of 4GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 4GB module provides the complete 4GB capacity for a compatible replacement or controlled memory upgrade. Its 1600MHz rating is the specified speed class for this SKU, paired with confirmed CL9 CAS latency. Operating voltage is specified as 1.5V.Compatibility requires a desktop PC that supports DDR3 UDIMM memory, 4GB per module and the complete 1 x 4GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 4GB is the combined capacity of the complete product, while 4GB is the capacity of each module. Brand Corsair Model CMX4GX3M1A1600C9 Total Capacity 4GB Capacity per Module 4GB Kit Configuration 1 x 4GB Memory Type DDR3 Speed 1600MHz CAS Latency CL9 Form Factor UDIMM Voltage 1.5V

Read more less

Corsair Mac Memory 8GB is the CMSA8GX3M2A1066C7 configuration: 2 x 4GB DDR3 SO-DIMM memory rated at 1066MHz with CL7 latency. It contains 2 matched modules of 4GB each, giving a confirmed total capacity of 8GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The 2 x 4GB kit provides the full 8GB as one defined configuration, with 4GB on each module. Its 1066MHz rating is the specified speed class for this SKU, paired with confirmed CL7 CAS latency.Compatibility requires a laptop or compact computer that supports DDR3 SO-DIMM memory, 4GB per module and the complete 2 x 4GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 8GB is the combined capacity of the complete product, while 4GB is the capacity of each module. The 2 x 4GB kit also requires enough compatible memory slots for all 2 modules. This SKU is associated with Mac systems, so those platform requirements should be checked before installation. Brand Corsair Model CMSA8GX3M2A1066C7 Total Capacity 8GB Capacity per Module 4GB Kit Configuration 2 x 4GB Memory Type DDR3 Speed 1066MHz CAS Latency CL7 Form Factor SO-DIMM Voltage 1.5V

Read more less

Kingston System Specific 4GB is the KTH-PL316S8/4G configuration: 1 x 4GB DDR3 RDIMM memory rated at 1600MHz. It contains 1 module of 4GB each, giving a confirmed total capacity of 4GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 4GB module provides the complete 4GB capacity for a compatible replacement or controlled memory upgrade. Its 1600MHz rating is the specified speed class for this SKU. ECC error correction is part of this module specification. It is Registered memory and requires a platform that supports RDIMM modules. Confirmed rank organisation is Single Rank.Compatibility requires a server or workstation that supports DDR3 RDIMM memory, 4GB per module and the complete 1 x 4GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 4GB is the combined capacity of the complete product, while 4GB is the capacity of each module. Brand Kingston Model KTH-PL316S8/4G Total Capacity 4GB Capacity per Module 4GB Kit Configuration 1 x 4GB Memory Type DDR3 Speed 1600MHz Form Factor RDIMM ECC ECC Buffered Type Registered Rank Single Rank

Read more less

Kingston ValueRAM 32GB is the KVR1333D3N9K4/32G configuration: 4 x 8GB DDR3 UDIMM memory rated at 1333MHz with CL9 latency. It contains 4 matched modules of 8GB each, giving a confirmed total capacity of 32GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The 4 x 8GB kit provides the full 32GB as one defined configuration, with 8GB on each module. Its 1333MHz rating is the specified speed class for this SKU, paired with confirmed CL9 CAS latency. Operating voltage is specified as 1.5V. The module is specified as unbuffered memory.Compatibility requires a desktop PC that supports DDR3 UDIMM memory, 8GB per module and the complete 4 x 8GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 32GB is the combined capacity of the complete product, while 8GB is the capacity of each module. The 4 x 8GB kit also requires enough compatible memory slots for all 4 modules. Brand Kingston Model KVR1333D3N9K4/32G Total Capacity 32GB Capacity per Module 8GB Kit Configuration 4 x 8GB Memory Type DDR3 Speed 1333MHz CAS Latency CL9 Form Factor UDIMM ECC Non-ECC Buffered Type Unbuffered Voltage 1.5V

Read more less

Kingston System Specific 8GB is the KTH-PL316S/8G configuration: 1 x 8GB DDR3 RDIMM memory rated at 1600MHz. It contains 1 module of 8GB each, giving a confirmed total capacity of 8GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 8GB module provides the complete 8GB capacity for a compatible replacement or controlled memory upgrade. Its 1600MHz rating is the specified speed class for this SKU. ECC error correction is part of this module specification. It is Registered memory and requires a platform that supports RDIMM modules. Confirmed rank organisation is Single Rank.Compatibility requires a server or workstation that supports DDR3 RDIMM memory, 8GB per module and the complete 1 x 8GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 8GB is the combined capacity of the complete product, while 8GB is the capacity of each module. Brand Kingston Model KTH-PL316S/8G Total Capacity 8GB Capacity per Module 8GB Kit Configuration 1 x 8GB Memory Type DDR3 Speed 1600MHz Form Factor RDIMM ECC ECC Buffered Type Registered Rank Single Rank

Read more less

Kingston HyperX FURY 4GB is the HX316C10FR/4 configuration: 1 x 4GB DDR3 UDIMM memory rated at 1600MHz with CL10 latency. It contains 1 module of 4GB each, giving a confirmed total capacity of 4GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 4GB module provides the complete 4GB capacity for a compatible replacement or controlled memory upgrade. Its 1600MHz rating is the specified speed class for this SKU, paired with confirmed CL10 CAS latency. Operating voltage is specified as 1.5V.Compatibility requires a desktop PC that supports DDR3 UDIMM memory, 4GB per module and the complete 1 x 4GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 4GB is the combined capacity of the complete product, while 4GB is the capacity of each module. Brand Kingston Model HX316C10FR/4 Total Capacity 4GB Capacity per Module 4GB Kit Configuration 1 x 4GB Memory Type DDR3 Speed 1600MHz CAS Latency CL10 Form Factor UDIMM Voltage 1.5V Colour Red

Read more less

Kingston System Specific 32GB is the KTH-PL316LLQ/32G configuration: 1 x 32GB DDR3L LRDIMM memory rated at 1600MHz. It contains 1 module of 32GB each, giving a confirmed total capacity of 32GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 32GB module provides the complete 32GB capacity for a compatible replacement or controlled memory upgrade. Its 1600MHz rating is the specified speed class for this SKU. Operating voltage is specified as 1.35V. ECC error correction is part of this module specification. It is Load Reduced memory and requires a platform that supports LRDIMM modules. Confirmed rank organisation is Quad Rank.Compatibility requires a server or workstation that supports DDR3L LRDIMM memory, 32GB per module and the complete 1 x 32GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 32GB is the combined capacity of the complete product, while 32GB is the capacity of each module. Brand Kingston Model KTH-PL316LLQ/32G Total Capacity 32GB Capacity per Module 32GB Kit Configuration 1 x 32GB Memory Type DDR3L Speed 1600MHz Form Factor LRDIMM ECC ECC Buffered Type Load Reduced Rank Quad Rank Voltage 1.35V

Read more less

Corsair ValueSelect 4GB is the CMSO4GX3M2A1333C9 configuration: 2 x 2GB DDR3 SO-DIMM memory rated at 1333MHz with CL9 latency. It contains 2 matched modules of 2GB each, giving a confirmed total capacity of 4GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The 2 x 2GB kit provides the full 4GB as one defined configuration, with 2GB on each module. Its 1333MHz rating is the specified speed class for this SKU, paired with confirmed CL9 CAS latency. Operating voltage is specified as 1.5V.Compatibility requires a laptop or compact computer that supports DDR3 SO-DIMM memory, 2GB per module and the complete 2 x 2GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 4GB is the combined capacity of the complete product, while 2GB is the capacity of each module. The 2 x 2GB kit also requires enough compatible memory slots for all 2 modules. Brand Corsair Model CMSO4GX3M2A1333C9 Total Capacity 4GB Capacity per Module 2GB Kit Configuration 2 x 2GB Memory Type DDR3 Speed 1333MHz CAS Latency CL9 Form Factor SO-DIMM Voltage 1.5V

Read more less

Kingston System Specific 16GB is the KTL-TS318/16G configuration: 1 x 16GB DDR3 RDIMM memory rated at 1866MHz. It contains 1 module of 16GB each, giving a confirmed total capacity of 16GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 16GB module provides the complete 16GB capacity for a compatible replacement or controlled memory upgrade. Its 1866MHz rating is the specified speed class for this SKU. ECC error correction is part of this module specification. It is Registered memory and requires a platform that supports RDIMM modules.Compatibility requires a server or workstation that supports DDR3 RDIMM memory, 16GB per module and the complete 1 x 16GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 16GB is the combined capacity of the complete product, while 16GB is the capacity of each module. Brand Kingston Model KTL-TS318/16G Total Capacity 16GB Capacity per Module 16GB Kit Configuration 1 x 16GB Memory Type DDR3 Speed 1866MHz Form Factor RDIMM ECC ECC Buffered Type Registered Voltage 1.5V

Read more less

G.SKILL Trident X 16GB is the F3-1600C7D-16GTX configuration: 2 x 8GB DDR3 UDIMM memory rated at 1600MHz with CL7 latency. It contains 2 matched modules of 8GB each, giving a confirmed total capacity of 16GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The 2 x 8GB kit provides the full 16GB as one defined configuration, with 8GB on each module. Its 1600MHz rating is the specified speed class for this SKU, paired with confirmed CL7 CAS latency. Intel XMP profile support is confirmed for compatible platforms. The confirmed design includes a heat spreader.Compatibility requires a desktop PC that supports DDR3 UDIMM memory, 8GB per module and the complete 2 x 8GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 16GB is the combined capacity of the complete product, while 8GB is the capacity of each module. The 2 x 8GB kit also requires enough compatible memory slots for all 2 modules. Brand G.SKILL Model F3-1600C7D-16GTX Total Capacity 16GB Capacity per Module 8GB Kit Configuration 2 x 8GB Memory Type DDR3 Speed 1600MHz CAS Latency CL7 Form Factor UDIMM XMP Yes

Read more less

Transcend 8GB is the TS1GSK64W6H configuration: 1 x 8GB DDR3L SO-DIMM memory rated at 1600MHz with CL11 latency. It contains 1 module of 8GB each, giving a confirmed total capacity of 8GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 8GB module provides the complete 8GB capacity for a compatible replacement or controlled memory upgrade. Its 1600MHz rating is the specified speed class for this SKU, paired with confirmed CL11 CAS latency. Operating voltage is specified as 1.35V. Confirmed rank organisation is 2Rx8.Compatibility requires a laptop or compact computer that supports DDR3L SO-DIMM memory, 8GB per module and the complete 1 x 8GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 8GB is the combined capacity of the complete product, while 8GB is the capacity of each module. Brand Transcend Model TS1GSK64W6H Total Capacity 8GB Capacity per Module 8GB Kit Configuration 1 x 8GB Memory Type DDR3L Speed 1600MHz CAS Latency CL11 Form Factor SO-DIMM Rank 2Rx8 Voltage 1.35V

Read more less

Corsair Vengeance Pro Series 8GB is the CMY8GX3M2B2133C11 configuration: 2 x 4GB DDR3 UDIMM memory rated at 2133MHz with CL11 latency. It contains 2 matched modules of 4GB each, giving a confirmed total capacity of 8GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The 2 x 4GB kit provides the full 8GB as one defined configuration, with 4GB on each module. Its 2133MHz rating is the specified speed class for this SKU, paired with confirmed CL11 CAS latency. Operating voltage is specified as 1.5V. Intel XMP profile support is confirmed for compatible platforms.Compatibility requires a desktop PC that supports DDR3 UDIMM memory, 4GB per module and the complete 2 x 4GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 8GB is the combined capacity of the complete product, while 4GB is the capacity of each module. The 2 x 4GB kit also requires enough compatible memory slots for all 2 modules. Brand Corsair Model CMY8GX3M2B2133C11 Total Capacity 8GB Capacity per Module 4GB Kit Configuration 2 x 4GB Memory Type DDR3 Speed 2133MHz CAS Latency CL11 Form Factor UDIMM Voltage 1.5V XMP Yes

Read more less

Kingston System Specific 8GB is the KTH-PL316ELV/8G configuration: 1 x 8GB DDR3L RDIMM memory rated at 1600MHz. It contains 1 module of 8GB each, giving a confirmed total capacity of 8GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The single 8GB module provides the complete 8GB capacity for a compatible replacement or controlled memory upgrade. Its 1600MHz rating is the specified speed class for this SKU. Operating voltage is specified as 1.35V. ECC error correction is part of this module specification. It is Registered memory and requires a platform that supports RDIMM modules. Confirmed rank organisation is Quad Rank.Compatibility requires a server or workstation that supports DDR3L RDIMM memory, 8GB per module and the complete 1 x 8GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 8GB is the combined capacity of the complete product, while 8GB is the capacity of each module. Brand Kingston Model KTH-PL316ELV/8G Total Capacity 8GB Capacity per Module 8GB Kit Configuration 1 x 8GB Memory Type DDR3L Speed 1600MHz Form Factor RDIMM ECC ECC Buffered Type Registered Rank Quad Rank Voltage 1.35V

Read more less

Kingston HyperX FURY 8GB is the HX316C10FRK2/8 configuration: 2 x 4GB DDR3 UDIMM memory rated at 1600MHz with CL10 latency. It contains 2 matched modules of 4GB each, giving a confirmed total capacity of 8GB. Capacity, module count, DDR generation and form factor identify this exact SKU and should not be copied from a neighbouring version in the same product family.The 2 x 4GB kit provides the full 8GB as one defined configuration, with 4GB on each module. Its 1600MHz rating is the specified speed class for this SKU, paired with confirmed CL10 CAS latency. Operating voltage is specified as 1.5V.Compatibility requires a desktop PC that supports DDR3 UDIMM memory, 4GB per module and the complete 2 x 4GB configuration. DDR generation and physical module type must match the target platform; visually similar memory using another standard is not interchangeable. Actual operating speed can depend on the processor memory controller, motherboard or system firmware, BIOS settings and installed module count. The stated 8GB is the combined capacity of the complete product, while 4GB is the capacity of each module. The 2 x 4GB kit also requires enough compatible memory slots for all 2 modules. Brand Kingston Model HX316C10FRK2/8 Total Capacity 8GB Capacity per Module 4GB Kit Configuration 2 x 4GB Memory Type DDR3 Speed 1600MHz CAS Latency CL10 Form Factor UDIMM Voltage 1.5V Colour Red

Read more less

Corsair Mac Memory 4GB is the CMSA4GX3M1A1333C9 configuration: 1 x 4GB DDR3 SO-DIMM laptop memory rated at 1333MHz with CL9 latency. It contains 1 module of 4GB each, giving a confirmed total capacity of 4GB. This exact capacity and module count matter because nearby versions in the same series may use a different kit layout, speed or latency.The single-module 1 x 4GB layout provides 4GB on one stick, which can suit a compatible system needing a direct memory replacement or a controlled capacity upgrade. Its 1333MHz rating and CL9 latency describe the performance profile of this specific SKU rather than a different model from the same family. Specified operating voltage is 1.5V.Corsair positions this module as Apple-qualified memory for supported Mac systems. Compatibility requires a laptop or compact system that accepts DDR3 SO-DIMM memory and supports the module capacity and speed. Actual operating speed can depend on the processor memory controller, firmware and the other installed modules. The total capacity is 4GB, while 4GB is the capacity of each individual module, so the two values should not be treated as interchangeable. Brand Corsair Model CMSA4GX3M1A1333C9 Total Capacity 4GB Capacity per Module 4GB Kit Configuration 1 x 4GB Memory Type DDR3 Speed 1333MHz CAS Latency CL9 Form Factor SO-DIMM Voltage 1.5V

Read more less

Kingston ValueRAM 2GB is the KVR16LS11S6/2 configuration: 1 x 2GB DDR3L SO-DIMM laptop memory rated at 1600MHz with CL11 latency. It contains 1 module of 2GB each, giving a confirmed total capacity of 2GB. This exact capacity and module count matter because nearby versions in the same series may use a different kit layout, speed or latency.The single-module 1 x 2GB layout provides 2GB on one stick, which can suit a compatible system needing a direct memory replacement or a controlled capacity upgrade. Its 1600MHz rating and CL11 latency describe the performance profile of this specific SKU rather than a different model from the same family. Specified operating voltage is 1.35V.The memory is specified as Non-ECC. It is also specified as Unbuffered. Confirmed rank organisation is 1Rx16. Compatibility requires a laptop or compact system that accepts DDR3L SO-DIMM memory and supports the module capacity and speed. Actual operating speed can depend on the processor memory controller, firmware and the other installed modules. The total capacity is 2GB, while 2GB is the capacity of each individual module, so the two values should not be treated as interchangeable. Brand Kingston Model KVR16LS11S6/2 Total Capacity 2GB Capacity per Module 2GB Kit Configuration 1 x 2GB Memory Type DDR3L Speed 1600MHz CAS Latency CL11 Form Factor SO-DIMM ECC Non-ECC Buffered Type Unbuffered Rank 1Rx16 Voltage 1.35V

Read more less

Kingston System Specific Memory 4GB is the KTL-TP3CL/4G configuration: 1 x 4GB DDR3L SO-DIMM laptop memory rated at 1600MHz. It contains 1 module of 4GB each, giving a confirmed total capacity of 4GB. This exact capacity and module count matter because nearby versions in the same series may use a different kit layout, speed or latency.The single-module 1 x 4GB layout provides 4GB on one stick, which can suit a compatible system needing a direct memory replacement or a controlled capacity upgrade. The confirmed 1600MHz rating identifies this SKU's speed class without borrowing latency figures from another version. Specified operating voltage is 1.35V.Kingston positions this system-specific module for select compatible Lenovo notebooks. Compatibility requires a laptop or compact system that accepts DDR3L SO-DIMM memory and supports the module capacity and speed. Actual operating speed can depend on the processor memory controller, firmware and the other installed modules. The total capacity is 4GB, while 4GB is the capacity of each individual module, so the two values should not be treated as interchangeable. Brand Kingston Model KTL-TP3CL/4G Total Capacity 4GB Capacity per Module 4GB Kit Configuration 1 x 4GB Memory Type DDR3L Speed 1600MHz Form Factor SO-DIMM Voltage 1.35V

Read more less

Corsair Vengeance 4GB is the CMSX4GX3M1A1600C9 configuration: 1 x 4GB DDR3 SO-DIMM laptop memory rated at 1600MHz with CL9 latency. It contains 1 module of 4GB each, giving a confirmed total capacity of 4GB. This exact capacity and module count matter because nearby versions in the same series may use a different kit layout, speed or latency.The single-module 1 x 4GB layout provides 4GB on one stick, which can suit a compatible system needing a direct memory replacement or a controlled capacity upgrade. Its 1600MHz rating and CL9 latency describe the performance profile of this specific SKU rather than a different model from the same family. Specified operating voltage is 1.5V.Compatibility requires a laptop or compact system that accepts DDR3 SO-DIMM memory and supports the module capacity and speed. Actual operating speed can depend on the processor memory controller, firmware and the other installed modules. The total capacity is 4GB, while 4GB is the capacity of each individual module, so the two values should not be treated as interchangeable. The complete 1 x 4GB configuration should also be checked against the number of compatible memory slots available in the target system. Brand Corsair Model CMSX4GX3M1A1600C9 Total Capacity 4GB Capacity per Module 4GB Kit Configuration 1 x 4GB Memory Type DDR3 Speed 1600MHz CAS Latency CL9 Form Factor SO-DIMM Voltage 1.5V

Read more less

Kingston HyperX Impact 16GB is the HX316LS9IBK2/16 configuration: 2 x 8GB DDR3L SO-DIMM laptop memory rated at 1600MHz with CL9 latency. It contains 2 matched modules of 8GB each, giving a confirmed total capacity of 16GB. This exact capacity and module count matter because nearby versions in the same series may use a different kit layout, speed or latency.The 2 x 8GB kit keeps the module capacity consistent across all 2 sticks and provides the full 16GB as one defined configuration. Its 1600MHz rating and CL9 latency describe the performance profile of this specific SKU rather than a different model from the same family. Confirmed primary timings are 9-9-9. Specified operating voltage is 1.35V/1.5V.Compatibility requires a laptop or compact system that accepts DDR3L SO-DIMM memory and supports the module capacity and speed. Actual operating speed can depend on the processor memory controller, firmware and the other installed modules. The total capacity is 16GB, while 8GB is the capacity of each individual module, so the two values should not be treated as interchangeable. The complete 2 x 8GB configuration should also be checked against the number of compatible memory slots available in the target system. Brand Kingston Model HX316LS9IBK2/16 Total Capacity 16GB Capacity per Module 8GB Kit Configuration 2 x 8GB Memory Type DDR3L Speed 1600MHz CAS Latency CL9 Primary Timings 9-9-9 Form Factor SO-DIMM Voltage 1.35V/1.5V Colour Black

Read more less

Corsair XMS3 8GB is the CMX8GX3M2A1600C9 configuration: 2 x 4GB DDR3 UDIMM desktop memory rated at 1600MHz with CL9 latency. It contains 2 matched modules of 4GB each, giving a confirmed total capacity of 8GB. This exact capacity and module count matter because nearby versions in the same series may use a different kit layout, speed or latency.The 2 x 4GB kit keeps the module capacity consistent across all 2 sticks and provides the full 8GB as one defined configuration. Its 1600MHz rating and CL9 latency describe the performance profile of this specific SKU rather than a different model from the same family. Specified operating voltage is 1.5V.A heat spreader is part of the confirmed module design. Compatibility requires a motherboard and processor that support DDR3 UDIMM memory, the selected capacity and module count. Actual operating speed can depend on the CPU memory controller, motherboard, BIOS and memory configuration. The total capacity is 8GB, while 4GB is the capacity of each individual module, so the two values should not be treated as interchangeable. The complete 2 x 4GB configuration should also be checked against the number of compatible memory slots available in the target system. Brand Corsair Model CMX8GX3M2A1600C9 Total Capacity 8GB Capacity per Module 4GB Kit Configuration 2 x 4GB Memory Type DDR3 Speed 1600MHz CAS Latency CL9 Form Factor UDIMM Voltage 1.5V Colour Black

Read more less